Skip to main content

Why is My TP-Link Router Not Working?

 TP-Link Router is one of the most used Routers for the stable internet connection. But, sometimes you can face the TP-Link Router Not Working issue. 

Are you having an issue with TP-Link Router Not Working problem?

Let’s start immediately 

This blog will help you do some troubleshooting steps if you cannot get internet from the TP-Link router. 

First, you need to understand the reason for the problem.

Causes - Why is my TP-Link Router not working?

Read the below requirements and try to resolve your issue as soon as possible. 

  • Due to ISP’s infrastructure issue.

  • Maybe you are connected to a bad Wi-Fi hotspot.

  • Might be you are using defective cable with router and modem

  • Strength of Wi-Fi hotspot may be insufficient – you may be near the edge of the Wi-Fi network.

  • Wi-Fi network is burdened, mostly this thing happens in crowded areas like on the street, stadiums, concerts, etc.

  • Internet drops again and again because of outdated drivers

  • Outdated firmware is the reason of week and drop internet connection

Make sure by reading the above steps you are able to understand the reason behind the problem. The fact is that if you understand the reason for the problem then you are able to solve your problem quickly. 

Most of the time you are facing TP-Link Configuration issues. click on the “how to configure TP-Link Router” and solve TP-Link Router Login issue as well!! 

Now, to start TP-router troubleshoot you must follow the basic steps.

Easy Fixes TP-Link Router Stopped Working


Here we describe the proper solution of TP-Router won’t work. Do the following and try to resolve your issue.  If you are facing an issue, reset your router and TP-Link Router Setup again or resolve your issue.

Solution 1- Make sure that Proper Physical Connection is Established between Your Modem and Router

First you need to check your modem and your router are connected with each other properly. In case, a red message appears on your screen that means your WAN port is unplugged on the router status page. Means, your modem is not properly connected with your modem. 

Insert the modem wire in the WAN port, check if the screen is showing the message again or not. In case, the message gets removed then great, if the message shows again then the error lies elsewhere. 

Solution 2- Reset your Router IP Address

Usually, The TP-Link routers have 192.168.0.1 or 192.168.1.1 as their default IP address; this may encounter with the present range of your router device. Because of this reason, your router device fails to connect with your modem, which more leads to internet connectivity issues.

If you want to fix an issue, one needs to change the LAN IP address of the router from 192.168.1.1 to 192.168.2.1. To change the IP address of the router, first click on Network and then go to LAN that is given on the left of the menu. If resetting your TP-Link router helps you fix the issue, then great but in case that does not happen.

Try resolving the TP-Link router not working problem with the help of our guide “Ways to Fix TP-Link Router Keep Disconnecting?”. 
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

Fix Error Code 90403 in TP-Link Control Panel

  Error code 90403 in TP-Link Wi-Fi Router control Panel encountering while you are setting up your control panel very first time or TPLink Router Setup   at very first time. If you are struggling with this error and you are searching a solution for this error.   Then, you are at right place. This post will help you, Go through with all solution and get the easy solution for error code 90403 in TP-link Router. The error code 90403 encountering during the unavailability of the internet connection from the source of the router while setting it up. The error code Occurs only when you get disconnected from the router while entering the Login TPLink Details.  To begin the first you must know about the causes of the error code 90403 Reasons of Error code 90403 See the below reason. Read them carefully and try to understand- why this error happens in TP-Link Router:   First, router is not responsive many more   May be outdate drivers and firmware ma...
Post a Comment
Read more

Tplinkwifi.net- TP-Link Router Login

  How to Login Tp-link router- Tp-link wifi.net Login Read the below mentioned steps- Login to the admin panel of the router through tplinkwifi.net : 1.        First and foremost, open a web browser like chrome. 2.        After opening Web browser into your system after that, type, http://www.tplinkwifi.netinto the address bar and hit on Enter key. 3.        A login page appears on your screen you need to enter login username and password. 4.        Enter the default username and password for the router admin Most probably, you can login with Tp-Link router by following above steps.Access information about Tp-Link Router login & setup. Go ahead website & follow process on tp-link wifi.net login. Fix issues of Tp-Link Router; Read the below mentioned steps- Login to the admin panel of the router through tplinkwifi.net : 1.    ...
Post a Comment
Read more